Electric Car EV Charging Station 7KW 32A US 110V IP65 Waterproof CE CQC

High Performance Home Charging Station: Compared with public charging stations, the charging speed can be increased by 5-7 times. The output current of 32A and the super power of 7KW make the charging time faster, keep your car in a fully powered state, and drive your car anytime, anywhere. High Compatibility Charging Head: US-standard 5-hole charging head, which can adapt to all vehicles with US-standard 5-hole charging head, and all products have passed CE, CQC, SAE J1772, TUV certification, which is a safe, efficient, and reliable of charging station. 9 Safety Protections: overvoltage, undervoltage, overload, short circuit, leakage, grounding, overtemperature, low temperature, design, can avoid the charging danger caused by the AC charging process, avoid the Injury to vehicles, people, etc.

The mean time between failures is as high as 8760 hours, so there is no need to worry about product failures during use. The charging cable as long as 8.5M can charge the car in a wide range without worrying about the inconvenience caused by the short charging distance. Superior Quality: The main body of the charging station is made of aluminum alloy body. The excellent material makes the main body of the charging station light and has a high level of, and is not afraid of damage to the main body caused by daily use. Item Type: Car Station Material: Aluminum alloy + rubber Input Voltage: US 110V Input Frequency: US standard 60Hz Maximum Power: 7KW Output Voltage: US 110V Output Current: 32A Rated Current: 16A Standby Power Consumption: 6W Wall-mounted Backboard Size: Approx.

190 x 150 x 10mm/7.48 x 5.91 x 0.39in. Applicable Scene: Indoor/outdoor Body Working Temperature: -30?

Waterproof Grade: IP65 Cooling Method: Natural cooling Mean Time Between Failures (MTBF): 8760H. Standard Certification Types: CE, CQC, SAE J1772, TUV. Method 1: Pull out to end charging; Method 2: Use card to end charging. 8 x Expanded Rubber Tube. For the first installation, pay attention to the one-to-one correspondence between the power wires of IN-L (live wire), IN-N (neutral wire), and PE (ground wire), and the live wire and neutral wire cannot be reversely connected.

PE (grounding wire) needs to be grounded reliably. After power-on, make sure the emergency stop switch is in the pop-up state. Before charging, ensure that the head is of stains and water. When charging is prohibited, place the charging station in the car. It is strongly recommended to install by a professional mechanic.

If you have any questions during the installation process, please contact our after-sales customer service in time to help you complete the installation and upgrade. If necessary, you can contact customer service. 116x40x1452mm/4.57x1.58x57.17in (LxWxH). Please note that the new type and old type of this product will be sent randomly, and make sure you will not mind before ordering.

We will reply your message within 48 hours. If you do not receive our reply within 48 hours, pls.

Post a message again because sometimes our message system may block some emails. If you are satisfied with our service, pls. Our aim is to provide Level Customer Service, your recognition will encourage us greatly and serve you better.

We strive to keep all our customers satisfy. We will do our up most to exceed your expectations in customer service, communication and dispatching of your orders.