EV Charging Wall Unit Type 2 Wallbox EV Car 32A Electric Vehicle

EV Fast : This electric car has an output of 415V and an input frequency of 50/60Hz. It usually takes about 4 to 5 hours to fully charge an electric car.

Safe: All our products are CE and TUV certified. Equipped with intelligent temperature control chip, to avoid the danger of excessive temperature. If the temperature exceeds normal, the output current is lowered or charging is stopped to prevent overheating. Protection: Under voltage protection, overload protection, short circuit protection, ground circuit protection, grounding protection, over temperature protection, low temperature protection, lightning protection. LCD Screen: With approxiamte 2.8 inch/7.1cm large LCD display, all data of your car can be displayed on the charging station when charging.

You can see the charging status including current, voltage and temperature. Smart Swing Charging: The charging plug is suitable for Type 2 vehicles and equipped with a card control switch to effectively prevent from charging stealing. Practical: It has a waterproof design, can work normally even on rainy days and can be mounted safely indoors and outdoors, fits for plug in electric vehicles according to IEC 62196-2 connector standard. Material : ABS TPU Copper Silver. Adjustable Current: 32A (8/10/13/16/32A) Voltage: 415V Power: 22KW Frequency: 50/60Hz RCD (Optional): TypeA RCD User Interface: LED indicator, LCD display approx.

2.8 inch/7.1cm, card swiping. Charging Head Standard: IEC 62196-2. Certification: CE, TUV Charging Interface: Type2. 5m/196.9in Charging Plug Waterproof Rate: IP55. Charging Station Waterproof Rate: IP65 Operating Temperature: -30? Operating Humidity: 5%-95% Features: over voltage protection, under voltage protection, overload protection, leakage protection, ground protection, over temperature protection, lightning protection, short circuit protection. 1 x Type2 Wall Box Electric Vehicle Charging Station.

1 x Charging Tip Wall Hook. 3 x Wall Hook Fixing Screw.

8 x Expansion Tube Bolts. 2 x Charging Station Hook Bracket. 7 x Buckle Bracket Fixing Screw.

When installing for the first time, be sure to ensure that the power cord takes IN to L (fire wire), IN to N (zero line), PE (ground wire) one after another, and the fire line and the zero line cannot be reversed. PE (Earth Wire) must be reliably grounded. Make sure the emergency stop button is activated after power-up. Before charging, ensure that there is no stain or water stain on the end of the charging head. It is forbidden to place the charging station in the car during charging.

We will reply your message within 48 hours. If you do not receive our reply within 48 hours, pls. Post a message again because sometimes our message system may block some emails. If you are satisfied with our service, pls.

Our aim is to provide Level Customer Service, your recognition will encourage us greatly and serve you better. We strive to keep all our customers satisfy. We will do our up most to exceed your expectations in customer service, communication and dispatching of your orders.